Enterasys SecureStack C2 C2G170-24 - Set Snmp Notifyprofile; Clear Snmp Notifyprofile

set snmp notifyprofile
8-36 SNMP Configuration
Row status = active
set snmp notifyprofile
UsethiscommandtocreateanSNMPnotifyfilterprofileconfiguration.Thisassociatesa
notificationfilter,createdwiththesetsnmpnotifyfiltercommand(“setsnmpnotifyfilter”on
page 8‐34),toasetofSNMPtargetparameterstodeterminewhichmanagementtargetsshould
notreceiveSNMPnotifications.
Syntax
set snmp notifyprofile profile targetparam targetparam [volatile | nonvolatile]
Parameters
Defaults
Ifstoragetypeisnotspecified,nonvolatile(permanent)willbeapplied.
Mode
Switchcommand,read‐write.
Example
Thisexampleshowshowtocreatean SNMPnotifyprofilenamedarea51 and a ssociate atarget
parametersentry.
C2(su)->set snmp notifyprofile area51 targetparam v3ExampleParams
clear snmp notifyprofile
UsethiscommandtodeleteanSNMPnotifyprofileconfiguration.
Syntax
clear snmp notifyprofile profile targetparam targetparam
Parameters
Defaults
None.
profile SpecifiesanSNMPfilternotifyname.
targetparam
targetparam
SpecifiesanassociatedentryintheSNMPTargetParamsTable.
volatile|
nonvolatile
(Optional)Specifiesastoragetype.
profile SpecifiesanSNMPfilternotifynametodelete.
targetparam
targetparam
SpecifiesanassociatedentryinthesnmpTargetParamsTable.