Enterasys SecureStack C2 C2G170-24

set cos state
11-20 Policy Classification Configuration
C2(su)->set cos state enable
C2(su)->set cos port-resource flood-ctrl 1.0 broadcast rate 5
C2(su)->set cos port-config flood-ctrl 1.0 ports ge.1.2;ge.2.2 append
Commands
set cos state
UsethiscommandtoenableordisableClassofService.
Syntax
set cos state {enable | disable}
Parameters
Defaults
None.
For information about... Refer to page...
set cos state 11-20
show cos state 11-21
clear cos state 11-21
set cos settings 11-22
clear cos settings 11-23
show cos settings 11-23
set cos port-config 11-24
show cos port-config 11-25
clear cos port-config 11-26
set cos port-resource irl 11-27
show cos port-resource 11-29
clear cos port-resource irl 11-30
set cos reference 11-31
show cos reference 11-32
clear cos reference 11-33
show cos unit 11-34
clear cos all-entries 11-35
show cos port-type 11-35
enable|disable EnablesordisablesClassofServiceontheswitch.Defaultstateis
disabled.