show port ratelimit
SecureStack C2 Configuration Guide 12-11
Example
Thisexampleshowshowtodisplaythecurrentratelimitinginformationforfe.2.1:
C2(su)->show port ratelimit fe.2.1
Global Ratelimiting status is disabled.
Port Threshold Priority
Number Index (kB/s) Action Direction List Status
----------- ----- --------- ------------ --------- ----------- --------
fe.2.1 1 64 discard inbound 0 disabled
fe.2.1 2 64 discard inbound 0 disabled
fe.2.1 3 64 discard inbound 0 disabled
fe.2.1 4 64 discard inbound 0 disabled
fe.2.1 5 64 discard inbound 0 disabled
fe.2.1 6 64 discard inbound 0 disabled
fe.2.1 7 64 discard inbound 0 disabled
fe.2.1 8 64 discard inbound 0 disabled
Table 12‐1showsadetailedexplanationofthecommandoutput.
Table 12-1 show port ratelimit Output Details
Output What It Displays...
Port Number Port designation. For a detailed description of possible port-string
values, refer to “Port String Syntax Used in the CLI” on page 7-2.
Index Resource index for this port.
Threshold (kB/s) Port rate limiting threshold in kilobytes per second.
Action Whether or not frames not conforming to rate limiting will be discarded.
Direction Currently rules can only be applied to inbound traffic.
Priority List 802.1D (802.1p) port priority level.
Status Whether or not this rule is active or disabled.
To Next Page
Loading...
Need help?
General