Enterasys SecureStack C2 C2G170-24

set igmpsnooping mcrtrexpiretime
13-6 IGMP Configuration
Example
ThisexampleshowshowtosettheIGMPmaximumresponsetimeto100seconds:
C2(su)->set igmpsnooping maxresponse 100
set igmpsnooping mcrtrexpiretime
UsethiscommandtoconfiguretheIGMPmulticastrouterexpirationtimefor thesystem.
Syntax
set igmpsnooping mcrtrexpire time
Parameters
Defaults
None.
Mode
Switchcommand,read‐write.
Usage
Thistimerisforexpiringtheswitchfromthemulticastdatabase.Ifthetimerexpires,andtheonly
addressleftisthemulticastswitch,thentheentrywillberemoved.
Example
ThisexampleshowshowtosettheIGMPmulticastrouterexpirationtimetoinfinity:
C2(su)->set igmpsnooping mcrtrexpiretime 0
set igmpsnooping add-static
ThiscommandcreatesanewstaticIGMPentryoraddsoneormorenewportstoanexistingentry.
Syntax
set igmpsnooping add-static group vlan-list [modify] [port-string]
Parameters
Defaults
Ifnoportsarespecified,allportsareaddedtotheentry.
time SpecifiestheIGMPmulticastrouterexpirationtime.Validvaluesare0‐
3600seconds.Avalueof0willconfigurethesystem withaninfinite
expirationtime.Thedefaultvalueis0.
group SpecifiesthemulticastgroupIPaddressfortheentry.
vlan‐list SpecifiestheVLANsonwhichtoconfiguretheentry.
modify (Optional)Addsthespecifiedportorportstoanexistingentry.
port‐string (Optional)Specifiestheportorportstoaddtotheentry.