Enterasys SecureStack C2 C2G170-24 User Manual

set port advertise
SecureStack C2 Configuration Guide 7-17
Example
ThisexampleshowshowtodisplayadvertisementstatusforGigabitports13and14:
C2(su)->show port advertise ge.1.13-14
ge.1.13 capability advertised remote
-------------------------------------------------
10BASE-T yes yes yes
10BASE-TFD yes yes yes
100BASE-TX yes yes yes
100BASE-TXFD yes yes yes
1000BASE-T no no no
1000BASE-TFD yes yes yes
pause yes yes no
ge.1.14 capability advertised remote
-------------------------------------------------
10BASE-T yes yes yes
10BASE-TFD yes yes yes
100BASE-TX yes yes yes
100BASE-TXFD yes yes yes
1000BASE-T no no no
1000BASE-TFD yes yes yes
pause yes yes no
set port advertise
Usethiscommandtoconfigurewhataportwilladvertiseforspeed/duplexcapabilitiesinauto ‐
negotiation.
Syntax
set port advertise {port-string}{10t | 10tfd | 100tx | 100txfd | 1000t | 1000tfd
| pause}
Parameters
Defaults
None.
Mode
Switchcommand,read‐write.
port‐string Selecttheportsforwhichtoconfigureadvertisements.Foradetailed
descriptionofpossibleport‐stringvalues,referto“PortStringSyntaxUsed
intheCLI”onpage7‐2.
10t Advertise10BASE‐Thalfduplexmode.
10tfd Advertise10BASE‐Tfullduplexmode.
100tx Advertise100BASE‐TX
halfduplexmode.
100txfd Advertise100BASE‐TXfullduplexmode.
1000t Advertise1000BASE‐Thalfduplexmode.
1000tfd Advertise1000BASE‐Tfullduplexmode.
pause AdvertisePAUSEforfull‐duplexlinks.

Enterasys SecureStack C2 C2G170-24 Specifications

General

Brand	Enterasys
Model	SecureStack C2 C2G170-24
Category	Switch
Language	English