Enterasys SecureStack C2 C2G170-24

set summertime date
SecureStack C2 Configuration Guide 3-21
set summertime date
Usethiscommandtoconfigurespecificdatestostartandstopdaylightsavingstime.These
settingswillbenon‐recurringandwillhavetoberesetannually.
Syntax
set summertime date start_month start_date start_year start_hr_min end_month
end_date end_year end_hr_min [offset_minutes]
Parameters
Defaults
Ifanoffsetisnotspecified,nonewillbeapplied.
Mode
Switchcommand,read‐write.
Example
ThisexampleshowshowtosetadaylightsavingstimestartdateofApril4,2004at2a.m.andan
endingdateofOctober31,2004at2a.m.withanoffsettimeofonehour:
C2(su)->set summertime date April 4 2004 02:00 October 31 2004 02:00 60
set summertime recurring
Usethiscommandtoconfigurerecurringdaylightsaving stimesettings.Thesesettingswillstart
andstopdaylightsavingstimeatthespecifieddayofthemonthandhoureachyearandwillnot
havetoberesetannually.
Syntax
set summertime recurring start_week start_day start_month start_hr_min end_week
end_day end_month end_hr_min [offset_minutes]
start_month Specifiesthemonthoftheyeartostartdaylightsavingstime.
start_date Specifiesthedayofthemonthtostartdaylightsavingstime.
start_year Specifiestheyeartostartdaylightsavingstime.
start_hr_min Specifiesthetimeofdaytostartdaylightsavingstime.Formatishh:mm.
end_month Specifiesthemonthofthe
yeartoenddaylightsavingstime.
end_date Specifiesthedayofthemonthtoenddaylightsavingstime.
end_year Specifiestheyeartoenddaylightsavingstime.
end_hr_min Specifiesthetimeofdaytoenddaylightsavingstime.Formatishh:mm.
offset_minutes (Optional)Specifiestheamountoftimeinminutestooffsetdaylight
savings
timefromthenon‐daylightsavingsti mesystemsetting .Valid
valuesare1‐1440.