Enterasys SecureStack C2 C2G170-24 User Manual

show snmp community
SecureStack C2 Configuration Guide 8-13
Parameters
Defaults
If not specified, settings related to all security models will be cleared.
Mode
Switchcommand,read‐write.
Example
Thisexampleshowshowtoclearallsettingsassignedtothe“public”userwithintheSNMPgroup
“anyone”:
C2(su)->clear snmp group anyone public
show snmp community
UsethiscommandtodisplaySNMPcommunity namesandstatus.InSNMPv1andv2,
communitynamesactaspasswordstoremotemanagement.
Syntax
show snmp community [name]
Parameters
Defaults
Ifnameisnotspecified,informationwillbedisplayedforallSNMPcommunities.
Mode
Switchcommand,read‐only.
Example
ThisexampleshowshowtodisplayinformationabouttheSNMP“public”comm unityname.For
adescriptionofthisoutput,refertosetsnmpcommunity(page8‐14).
C2(su)->show snmp community public
--- Configured community strings ---
Name = *********
Security name = public
Context =
Transport tag =
Storage type = nonVolatile
Status = active
groupname SpecifiestheSNMPgrouptobecleared.
user SpecifiestheSNMPusertobecleared.
security‐modelv1|
v2c|usm
(Optional)Clearsthesettingsassociatedwithaspecificsecuritymodel.
name (Optional)DisplaysSNMPinformationforaspecificcommunityname.

Enterasys SecureStack C2 C2G170-24 Specifications

General

Brand	Enterasys
Model	SecureStack C2 C2G170-24
Category	Switch
Language	English