set maclock enable
SecureStack C2 Configuration Guide 23-53
Example
ThisexampleshowshowtodisplayMAClockinginformationfortheendstationsconnectedtoall
GigabitEthernetportsinunit/module2:
C2(su)->show maclock stations fe.2.*
Port Number MAC Address Status State Aging
------------ ----------------- -------------- -------------- -----
fe.2.1 00:a0:c9:39:5c:b4 active first arrival true
fe.2.7 00:a0:c9:39:1f:11 active static false
Table 23‐7providesanexplanationofthecommandoutput.
set maclock enable
UsethiscommandtoenableMAClockinggloballyorononeormoreports.
Syntax
setmaclockenable[port‐string]
Parameters
Defaults
Ifport‐stringisnotspecified,MAClockingwillbeenabledglobally.
Mode
Switchcommand,read‐write.
Usage
Whenenabledandconfigured,MAClockingdefineswhichMACaddresses,aswellashowmany
MACaddressesarepermittedtousespecificport(s).
Table 23-7 show maclock stations Output Details
Output Field What It Displays...
Port Number Port designation. For a detailed description of possible port-string values, refer to
“Port String Syntax Used in the CLI” on page 7-2.
MAC address MAC address of the end station(s) locked to the port.
Status Whether the end stations are active or inactive.
State Whether the end station locked to the port is a first arrival or static connection.
Aging When true, FirstArrival MACs that have aged out of the forwarding database will be
removed for the associated port lock.
Note: MAC locking needs to be enabled globally and on appropriate ports for it to function.
port‐string (Optional)EnablesMAClockingonspecificport(s).Foradetailed
descriptionofpossibleport‐stringvalues,referto“PortStringSyntaxUsed
intheCLI”onpage 7‐2.
To Next Page
Loading...
Need help?
General