show ip pimsm interface
20-54 IPv4 Routing Protocol Configuration
COMPONENT TABLE
Component Component Component Component
Index BSR Address BSR Expiry Time CRP Hold Time
(hh:mm:ss) (hh:mm:ss)
---------- --------------- --------------- -------------
1 192.168.30.2 00:02:10 00:00:00
Table 20‐8providesanexplanationofthecommandoutput.
show ip pimsm interface
ThiscommanddisplaysPIM‐SMstatusoftherouterinterfaces.Withthestatsparameter,this
commanddisplaysstatisticalinformationforPIM‐SMonthespecifiedinterface.
Syntax
show ip pimsm interface {vlan vlan-id | stats {vlan-id | all}}
Parameters
Defaults
None.
Mode
Anyroutermode.
Examples
ThisexampleshowshowtodisplayPIMinterfaceinformation.
.
C2(su)->router> show ip pimsm interface vlan 30
VLAN ID 30
IP Address 192.168.30.1
Subnet Mask 255.255.255.0
Mode enable
Table 20-8 show ip pimsm componenettable Output Details
Output Field What it displays
Component Index This field displays a number which uniquely identifies the component.
Component BSR
Address
This field displays the IP address of the bootstrap router (BSR) for the local PIM
region.
Component BSR
Expiry Time
This field displays the minimum time remaining before the BSR in the local domain
will be declared down.
Component CRP
Hold Time
This field displays the hold time of the component when it is a candidate rendezvous
point.
vlanvlan‐id DisplayPIM‐SMinformationforthespecifiedIP interfaceenabledfor
PIM.
stats DisplayPIM‐SMinterfacestatistics.
vlan‐id|all DisplaystatisticsforaspecificVLANorallVLANs.
To Next Page
Loading...
Need help?
General