show mac agetime
SecureStack C2 Configuration Guide 14-21
Defaults
Ifnoparametersarespecified,allMACaddressesforthedevicewillbedisplayed.
Mode
Switchcommand,read‐only.
Example
ThisexampleshowshowtodisplayMACaddressinformationforge.3.1:
C2(su)->show mac port ge.3.1
MAC Address FID Port Type
----------------- ---- ------------- --------
00-09-6B-0F-13-E6 15 ge.3.1 Learned
MAC Address VLAN Port Type Status Egress Ports
----------------- ---- ------------- ------- ------- ---------------------------
01-01-23-34-45-56 20 any mcast perm ge.3.1
Table 14‐6providesanexplanationofthecommandoutput.
show mac agetime
Usethiscommandtodisplaytheti meoutperiodforaginglearnedMACentries.
Syntax
show mac agetime
Parameters
None.
Table 14-6 show mac Output Details
Output Field What It Displays...
MAC Address MAC addresses mapped to the port(s) shown.
FID Filter database identifier.
Port Port designation.
Type Address type. Valid types are:
• Learned
•Self
• Management
• Other (this will include any static MAC locked addresses as described in
“Configuring MAC Locking” on page 23-50).
• mcast (multicast)
VLAN The VLAN ID configured for the multicast MAC address.
Status The status of the multicast address.
Egress Ports The ports which have been added to the egress ports list.
To Next Page
Loading...
Need help?
General