Enterasys SecureStack C2 C2G170-24 - Clear Cos Port-Resource Flood-Ctrl; Set Cos Reference

clear cos port-resource flood-ctrl
SecureStack C2 Configuration Guide 11-31
clear cos port-resource flood-ctrl
Usethiscommandtoclearfloodcontrolportresourcestodefaultvalues.
Syntax
clear cos port-resource flood-ctrl {all | group-type-index {unicast | multicast |
broadcast | all [rate]}}
Parameters
Defaults
None.
Mode
Switchcommand,read‐write.
Example
Thisexampleclearstheunicastportresourceforportgroup1.0todefaultvalues.
C2(su)->clear cos port-resource flood-ctrl 1.0 unicast
set cos reference
UsethiscommandtosettheClassofServiceinboundratelimitingreferenceconfiguration.
Syntax
set cos reference irl group-type-index reference rate-limit irl-index
all Clearallfloodcontrolresourcesforallportgroups.
group‐type‐index Specifiesaportgroup/typeindex.Validentriesareintheformof
group#.port‐type.
Validvaluesforgroup#canrangefrom0to7.Validvaluesforport‐type
canrangefrom0to1,althoughonly porttype
0iscurrentlysupported.
Forexample,portgroup3wouldbespecifiedas3.0.
unicast Clearunicastportresourcesforthespecifiedportgroup.
multicast Clearmulticastportresourcesforthespecifiedportgroup.
broadcast Clearbroadcastportresourcesforthe specifiedportgrou p.
all Clearallfloodcontrolportresourcesforthe
specifiedportgroup.
rate (Optional)Clearthedataratelimiterofthespecifiedtypeofport
resourcetothedefault(noneordisabled).