To Next Page

To Previous Page

clear spantree msti

SecureStack C2 Configuration Guide 9-13

clear spantree msti

UsethiscommandtodeleteoneormoreMultipleSpanningTreeinstances.

Syntax

clear spantree msti [sid sid]

Parameters

Defaults

Ifsidisnotspecified,allMSTinstanceswillbecleared.

Mode

Switchcommand,read‐write.

Example

ThisexampleshowshowtodeleteallMSTinstances:

C2(su)->clear spantree msti

show spantree mstmap

UsethiscommandtodisplaythemappingofafilteringdatabaseID(FID)toaSpanningTrees.

SinceVLANsaremappedtoFIDs,thisshowstowhichSIDaVLANismapped.

Syntax

show spantree mstmap [fid fid]

Parameters

Defaults

Iffidisnotspecified,informationforallassignedFIDswillbedisplayed.

Mode

Switchcommand,read‐only.

Example

ThisexampleshowshowtodisplaySIDtoFIDmappinginformationforFID1.Inthiscase,no

newmappingshavebeenconfigured:

C2(su)->show spantree mstmap fid 1

FID: SID:

1 0

sidsid (Optional)DeletesaspecificmultipleSpanningTreeID.

fidfid (Optional)DisplaysinformationforspecificFIDs.

Enterasys SecureStack C2 C2G170-24 User Manual

Other manuals for Enterasys SecureStack C2 C2G170-24