Enterasys SecureStack C2 C2G170-24 - Clear Lldp Port Tx-Tlv

clear lldp port tx-tlv
SecureStack C2 Configuration Guide 6-29
Parameters
Defaults
None.
Mode
Switchcommand,read‐write.
Example
Thisexamplereturnsportge.1.1tothedefaultLLDP‐MEDtrapstateofdisabled.
C2(rw)->clear lldp port med-trap ge.1.1
clear lldp port tx-tlv
UsethiscommandtocleartheoptionalLLDPandLLDP‐MEDTLVstobetransmittedin
LLDPDUsbythespecifiedportorportstothedefaultvalueofdisabled.
Syntax
clear lldp port tx-tlv {[all] | [port-desc] [sys-name] [sys-desc] [sys-cap] [mgmt-
addr] [vlan-id] [stp] [lacp] [gvrp] [mac-phy] [poe] [link-aggr] [max-frame] [med-
cap] [med-loc] [med-poe]} port-string
Parameters
port‐string Specifiestheportorrangeofportstobeaffected.
all DisablesalloptionalTLVsfrombeingtransmittedinLLDPDUs.
port‐desc DisablesthePortDescriptionoptionalbasicLLDPTLVfrombeing
transmittedinLLDPDUs.
sys‐name DisablestheSystemNameoptionalbasicLLDPTLVfrombeing
transmittedinLLDPDUs.
sys‐desc DisablestheSystemDescriptionoptionalbasicLLDPTLVfrombeing
transmittedin
LLDPDUs.
sys‐cap DisablestheSystemCapabilitiesoptionalbasicLLDPTLVfrom
beingtransmittedinLLDPDUs.
mgmt‐addr DisablestheManagementAddressoptionalbasicLLDPTLVfrom
beingtransmittedinLLDPDUs.
vlan‐id DisablesthePortVLANIDIEEE802.1ExtensionsTLV frombeing
transmittedinLLDPDUs.
stp DisablestheSpanningTreeinformation
definedbyProtocolIdentity
IEEE802.1ExtensionsTLVfrombeingtransmittedinLLDPDUs.
lacp DisablestheLACPinformationdefinedbyProtocolIdentityIEEE
802.1ExtensionsTLVfrombeingtransmittedinLLDPDUs.
gvrp DisablestheGVRPinformationdefinedbyProtocolIdentityIEEE
802.1ExtensionsTLVfrombeingtransmittedinLLDPDUs.
mac‐phy Disables
theMAC‐PHYConfiguration/StatusIEEE802.3Extensions
TLVfrombeingtransmittedinLLDPDUs.