Enterasys SecureStack C2 C2G170-24 - Show Snmp Access Output Details

show snmp access
8-16 SNMP Configuration
Defaults
Ifgroupnameisnotspecified,accessinformationforallSNMPgroupswillbedisplayed.
Ifsecurity‐modelisnotspecified,accessinformationforallSNMPversionswillbedisplayed.
Ifnoauthentication,authenticationorprivac yarenotspecified,accessinformationforall
securitylevelswillbedisplayed.
Ifcontextisnotspecified,
allcontextswillbedisplayed.
Ifvolatile,nonvolatileorread‐onlyarenotspecified,allentriesofallstoragetypeswillbe
displayed.
Mode
Switchcommand,read‐only.
Example
ThisexampleshowshowtodisplaySNMPaccess information:
C2(su)->show snmp access
Group = SystemAdmin
Security model = USM
Security level = noAuthNoPriv
Read View = All
Write View =
Notify View = All
Context match = exact match
Storage type = nonVolatile
Row status = active
Group = NightOperator
Security model = USM
Security level = noAuthNoPriv
Read View = All
Write View =
Notify View = All
Context match = exact match
Storage type = nonVolatile
Row status = active
Table 8‐6providesanexplanationofthecommandoutput.
contextcontext (Optional)Displaysaccessinformationforaspecificcontext.Fora
descriptionofhowtospecifySNMPcontexts,referto“UsingSNMP
ContextstoAccessSpecificMIBs”onpage 8‐3.
volatile|
nonvolatile|read‐
only
(Optional)Displaysaccessentriesfora
specificstoragetype.
Table 8-6 show snmp access Output Details
Output Field What It Displays...
Group SNMP group name.
Security model Security model applied to this group. Valid types are: SNMPv1,
SNMPv2c, and SNMPv3 (User based - USM).