Enterasys SecureStack C2 C2G170-24

show ip pimsm staticrp
20-58 IPv4 Routing Protocol Configuration
Parameters
Defaults
None.
Mode
Anyroutermode.
Example
ThisexampleshowshowtodisplayRPthatwillbeselectedforgroupaddress224.0.0.0:
C2(su)->router> show ip pimsm rphash 224.0.0.0
192.168.129.223
show ip pimsm staticrp
DisplaythePIM‐SMstaticRendezvousPointinformation.
Syntax
show ip pimsm staticrp
Parameters
None.
Mode
Anyroutermode.
Defaults
None.
Example
ThisexampleshowshowtodisplayPIMinformation.
C2(su)->router# show ip pimsm staticrp
STATIC RP TABLE
Address Group Address Group Mask
--------------- --------------- ---------------
123.231.111.121 234.0.0.0 255.0.0.0
192.168.129.223 224.0.0.0 240.0.0.0
Table 20‐13providesanexplanationofthecommandoutput.
group‐address TheGroupAddressfortheRP.