Enterasys SecureStack C2 C2G170-24

set webview
SecureStack C2 Configuration Guide 3-51
Example
ThisexampleshowshowtodisplayWebViewstatus:
C2(rw)->show webview
WebView is Enabled.
set webview
UsethiscommandtoenableordisableWebViewontheswitch.
Syntax
set webview {enable | disable}
Parameters
Defaults
None.
Mode
Switchcommand,read‐write.
Usage
ItisgoodpracticeforsecurityreasonstodisableHTTPaccessontheswitchwhenfinished
configuringwithWebView,andthentoonlyenableWebViewontheswitchwhenchanges needto
bemade.
Example
ThisexampleshowshowtodisableWebViewontheswitch:
C2(rw)->set webview disable
show ssl
UsethiscommandtodisplaySSLstatus.
Syntax
show ssl
Parameters
None.
Defaults
None.
Mode
Switchcommand,read‐only.
enable|disable EnableordisableWebViewontheswitch.