Enterasys SecureStack C2 C2G170-24

clear pwa banner
SecureStack C2 Configuration Guide 23-65
clear pwa banner
UsethiscommandtoresetthePWAloginbanner toablankstring.
Syntax
clear pwa banner
Parameters
None.
Defaults
None.
Mode
Switchcommand,read‐write.
Example
ThisexampleshowshowtoresetthePWAloginbannertoablankstring
C2(su)->clear pwa banner
set pwa displaylogo
UsethiscommandtosetthedisplayoptionsfortheEnterasysNetworkslogo.
Syntax
set pwa displaylogo {display | hide}
Parameters
Defaults
None.
Mode
Switchcommand,read‐write.
Example
ThisexampleshowshowtohidetheEnterasysNetworkslogo:
C2(su)->set pwa displaylogo hide
display|hide DisplaysorhidestheEnterasysNetworkslogowhenthePWAwebsite
displays.