Enterasys SecureStack C2 C2G170-24

clear port protected name
SecureStack C2 Configuration Guide 7-55
Example
Thisexampleshowshowtoshowthenameofprotectedportgroup1:
C2(ro)->show port protected name 1
Group ID Group Name
-----------------------------
1 group1
clear port protected name
Usethiscommandtoclearthenameofaprotectedgroup.
Syntax
clear port protected name group-id
Parameters
Defaults
None.
Mode
Switchcommand,read‐write.
Example
Thisexampleshowshowtoclearthenameofprotectedportgroup1:
C2(rw)->clear port protected name 1
group‐id Specifiestheidofthegroupforwhichtoclearthename.Idcanrange
from0to2.