Configuring Classification Rules
11-6 Policy Classification Configuration
Configuring Classification Rules
Purpose
Toreview,create,assign,andunassignclassificationrulestopolicyprofiles.Thismapsuser
profilestoprotocol‐basedframefilteringpolicies.
Commands
show policy rule
Usethiscommandtodisplaypolicyclassificationruleinformation.
Syntax
show policy rule [all | admin-profile | profile-index] [ether | icmptype | ipproto
| ipdestsocket | ipsourcesocket | iptos | macdest | macsource | tcpdestport |
tcpsourceport | udpdestport | udpsourceport] [data] [mask mask] [port-string port-
string] [rule-status {active | not-in-service | not-ready}] [storage-type {non-
volatile | volatile}] [vlan vlan] | [drop | forward] [dynamic-pid dynamic-pid]
[cos cos] [admin-pid admin-pid] [-verbose] [usage-list] [display-if-used]
Parameters
Note: B3, C3, and G3 devices support profile-based CoS traffic rate limiting only. Policy rules
specifying CoS will only rate limit on D2, C2 and B2 devices, including when C2 and B2 devices are
configured on mixed stacks containing B3 and C3 devices.
For information about... Refer to page...
show policy rule 11-6
show policy capability 11-8
set policy rule 11-10
clear policy rule 11-13
clear policy all-rules 11-14
all|admin‐
profile|profile‐
index
Displayspolicyclassificationrulesforallprofiles,theadmin‐profile,orfor
aspecificprofileindexnumber.Validvaluesare1‐1023.
ether DisplaysEthernettypeIIrules.
icmptype DisplaysICMPtyperules.
ipproto DisplaysIPprotocolfieldinIPpacketrules.
ipdestsocket DisplaysIPdestinationaddress
rules.
ipsourcesocket DisplaysIPsourceaddressrules.
iptos DisplaysTypeofServicerules.
macdest DisplaysMACdestinationaddressrules.
macsource DisplaysMACsourceaddressrules.
To Next Page
Loading...
Need help?
General