Enterasys SecureStack C2 C2G170-24 User Manual

ip route
SecureStack C2 Configuration Guide 19-17
E2 33.33.0.0/16 [150/20] via 168.0.0.249, Vlan 3205
ip route
UsethiscommandtoaddorremoveastaticIProute.Thenoformofthiscomm andremovesthe
staticIProute.
ip route prefix mask dest-addr [distance]
no ip route prefix mask forward-addr
Parameters
Defaults
Ifdistanceisnotspecified, thedefaultvalueof1willbeapplied.
Mode
Globalconfiguration:C2(su)‐>router(Config)#
Example
ThisexampleshowshowtosetIPaddress10.1.2.3asthenexthopgatewaytodestinationaddress
10.0.0.0:
C2(su)->router(Config)#ip route 10.0.0.0 255.0.0.0 10.1.2.3
ping
UsethiscommandtotestroutingnetworkconnectivitybysendingIPpingrequests.
Syntax
ping ip-address
Parameters
Defaults
None.
Mode
PrivilegedEXEC:C2(su)‐>router#
prefix SpecifiesadestinationIPaddressprefix.
mask Specifiesadestinationprefixmask.
dest‐addr Specifiesaforwarding(gateway)IPaddress.
distance (Optional)Specifiesanadministrativedistancemetric forthisroute.Valid
valuesare1(default)to255.Routeswithlowervaluesreceivehigher
preferenceinrouteselection.
ip‐address SpecifiestheIPaddressofthesy stemtoping.

Enterasys SecureStack C2 C2G170-24 Specifications

General

Brand	Enterasys
Model	SecureStack C2 C2G170-24
Category	Switch
Language	English