Enterasys SecureStack C2 C2G170-24 - Clear Policy All-Rules

clear policy all-rules
11-14 Policy Classification Configuration
Defaults
Whenapplicable,dataandmaskmustbespecifiedforindividualrulestobecleared.
Mode
Switchcommand,read‐write.
Examples
ThisexampleshowshowtodeleteEthernetIIType1526classificationruleentriesassociatedwith
policyprofile1fromallports
C2(su)->clear policy rule 1 ether 1526
Thisexampleshowshowtoremovearulefrompolicyprofile5thatwillforwardUDPframes
fromsourceport45:
C2(su)->clear policy rule 5 udpportsource 45 forward
clear policy all-rules
Usethiscommandtoremoveallpolicyclassificationrules.
Syntax
clear policy all-rules
Parameters
None.
Defaults
None.
Mode
Switchcommand,read‐write.
Example
Thisexampleshowshowtoremovealladministrativeandpolicyindexrules:
C2(su)->clear policy all-rules
udpdestport DeletesassociatedUDPdestinationportclassificationrule.
udpsourceport DeletesassociatedUDPsourceportclassificationrule.