Enterasys SecureStack C2 C2G170-24 User Manual

show spantree mstilist
9-12 Spanning Tree Configuration
show spantree mstilist
UsethiscommandtodisplayalistofMultipleSpanningTree(MST)instancesconfiguredonthe
device.
Syntax
show spantree mstilist
Parameters
None.
Defaults
None.
Mode
Switchcommand,read‐only.
Example
ThisexampleshowshowtodisplayalistofMSTinstances.Inthiscase,SID2hasbeenconfigured:
C2(su)->show spantree mstilist
Configured Multiple Spanning Tree instances:
2
set spantree msti
UsethiscommandtocreateordeleteaMultipleSpanningTreeinstance.
Syntax
set spantree msti sid sid {create | delete}
Parameters
Defaults
None.
Mode
Switchcommand,read‐write.
Example
Thisexampleshowshowtocreatean MSTinstance2:
C2(su)->set spantree msti sid 2 create
sidsid SetstheMultipleSpanningTreeID.Validvaluesare1‐4094.
SecureStackC2deviceswillsupportupto4MSTinstances.
create|delete CreatesordeletesanMSTinstance.

Enterasys SecureStack C2 C2G170-24 Specifications

General

Brand	Enterasys
Model	SecureStack C2 C2G170-24
Category	Switch
Language	English