Enterasys SecureStack C2 C2G170-24 - Set Cos Port-Resource Irl

set cos port-resource irl
SecureStack C2 Configuration Guide 11-27
Defaults
None.
Mode
Switchcommand,read‐write.
Usage
Thedefaultportgroup0.0cannotbedeleted.
Example
ThisexampledeletesallIRLPortGroupsexceptfortheDefaultgroup0.0:
C2(su)->clear cos port-config irl all
set cos port-resource irl
Usethiscommandtosettheinboundratelimitparametersforaspecif icIRLresourceforaspecific
portgroup.
Syntax
set cos port-resource irl group-type-index irl-index {[unit {kbps}] [rate rate]
[type {drop}]}[syslog enable | disable] [trap enable|disable]
Parameters
Defaults
None.
Mode
Switchcommand,read‐write.
group‐type‐index Specifiesaninboundratelimitingportgroup/typeindex.Validentriesare
intheformofgroup#.port‐type.
Validvaluesforgroup#canrangefrom0to7.Validvaluesforport‐type
canrangefrom0to1,althoughonlyporttype0is
currentlysupported.
Forexample,portgroup3wouldbespecifiedas3.0.
irl‐index Indexnumberoftheinboundratelimiterresourceassociatedwiththis
entry.Validvaluesrangefrom0to99.
unit Unitofmeasurefortheinboundratelimiter(onlyoptionisKbps).
kbps Kilobitspersecond.
raterate Datarate
forthisinboundratelimiter.Thisistheactualrate limit.Valid
valuesrangefrom512to1,000,000KbpsforaGigabitport.
typedrop Actionfortheratelimiter.Theonlyactionoptionisdroptheframeifall
limitersareexceeded.
syslog
enable|disable
Enableordisablereportingasyslogentry
iflimitersareexceeded.
trapenable|disable Enableordisablesendingatrapiflimitersareexceeded.