Enterasys SecureStack C2 C2G170-24

set multiauth precedence
23-36 Authentication and Authorization Configuration
Example
Thisexampleshowshowtoclearthesystemauthenticationmode:
C2(rw)->clear multiauth mode
set multiauth precedence
Usethiscommandtosetthesystem’smulti pleauthenticationadministrativeprecedence.
Syntax
set multiauth precedence {[dot1x] [mac] [pwa]}
Parameters
Defaults
None.
Mode
Switchcommand,read‐write.
Usage
Whenauserissuccessfullyauthenticatedby morethanonemethodatthesametime,the
precedenceoftheauthenticationmethodswilldeterminewhichRADIUS‐returnedfilterIDwillbe
processedandresultinanappliedtrafficpolicyprofile.
Example
ThisexampleshowshowtosetprecedenceforMACauthentication:
C2(rw)->set multiauth precedence mac dot1x
clear multiauth precedence
Usethiscommandtoclearthesystem’smultipleauthenticationadministrativeprecedence.
Syntax
clear multiauth precedence
Parameters
None.
Defaults
None.
dot1x Setsprecedencefor802.1Xauthentication.
mac SetsprecedenceforMACauthentication.
pwa Setsprecedenceforportwebauthentication