Enterasys SecureStack C2 C2G170-24

clear macauthentication password
SecureStack C2 Configuration Guide 23-25
Example
ThisexampleshowshowtosettheMACauthenticationpasswordto“macauth”:
C2(su)->set macauthentication password macauth
clear macauthentication password
UsethiscommandtocleartheMACauthenticationpassword.
Syntax
clear macauthentication password
Parameters
None.
Defaults
None.
Mode
Switchcommand,read‐write.
Example
ThisexampleshowshowtocleartheMACauthenticationpassword:
C2(su)->clear macauthentication password
set macauthentication port
UsethiscommandtoenableordisableoneormoreportsforMACauthentication.
Syntax
set macauthentication port {enable | disable} port-string
Parameters
Defaults
None.
Mode
Switchcommand,read‐write.
enable|disable EnablesordisablesMACauthentication.
port‐string Specifiesport(s)onwhichtoenableordisableMACau thentication.Fora
detaileddescriptionofpossibleport‐stringvalues,referto“PortString
SyntaxUsedintheCLI”onpage 7‐2.