Enterasys SecureStack C2 C2G170-24 - Set Banner Motd; Clear Banner Motd

set banner motd
3-24 Basic Configuration
set banner motd
Usethiscommandtosetthebannermessageofthedaydisplayedatsessionlogin.
Syntax
set banner motd message
Parameters
Defaults
None.
Mode
Switchcommand,read‐write.
Example
Thisexampleshowshowtosetthemessageofthedaybannertoread:“Thissystembelongsto
XYZCorporation.Useofthissystem isstrictlylimitedtoauthorizedpersonnel.”
C2(rw)->set banner motd "\tThis system belongs to XYZ Corporation.\nUse of this
system is strictly limited to authorized personnel."
clear banner motd
Usethiscommandtoclearthebannermessageofthedaydisplayedatsessionlogintoablank
string.
Syntax
clear banner motd
Parameters
None.
Defaults
None.
Mode
Switchcommand,read‐write.
Note: Banner message text must be enclosed in beginning and ending double quotation marks.
The message itself cannot contain any additional double quotation marks.
message Specifiesamessageoftheday.Thisisatextstringthatneedstobein
doublequotesifanyspacesareused.Usea\nforanewlineand\tfora
tab(eightspaces).