Enterasys SecureStack C2 C2G170-24

set prompt
SecureStack C2 Configuration Guide 3-23
set prompt
Usethiscommandtomodifythecommandprompt.
Syntax
set prompt prompt_string
Parameters
Defaults
None.
Mode
Switchcommand,read‐write.
Example
ThisexampleshowshowtosetthecommandprompttoSwitch1:
C2(su)->set prompt “Switch 1”
Switch 1(su)->
show banner motd
Usethiscommandtoshowthebannermessageofthedaythatwilldisplayatsessionlogin.
Syntax
show banner motd
Parameters
None.
Defaults
None.
Mode
Switchcommand,read‐only.
Example
Thisexampleshowshowtodisplaythebannermessageoftheday:
C2(rw)->show banner motd
This system belongs to XYZ Corporation.
Use of this system is strictly limited to authorized personnel.
prompt_string Specif iesatextstringforthecommandprompt.
Note: A prompt string containing a space in the text must be enclosed
in quotes as shown in the example below.