Enterasys SecureStack C2 C2G170-24

clear dhcpsnooping limit
SecureStack C2 Configuration Guide 17-15
Syntax
clear dhcpsnooping database [write-delay]
Parameters
Defaults
None.
Mode
Switchcommand,read‐write.
Usage
Thiscommandwillsetthedatabasewritedelayvaluetothedefaultof300seconds.
Example
Thisexamplesetsthedatabasestoragelocationtothedefaultoflocal.
C2(su)->clear dhcpsnooping database
clear dhcpsnooping limit
Usethiscommandtoresettheratelimitvaluestothedefaultsof15packetspersecondwitha
burstintervalof1second.
Syntax
clear dhcpsnooping limit port-string
Parameters
Defaults
None.
Mode
Switchcommand,read‐write.
Example
Thisexampleresetstheratelimitvaluestotheirdefaultsonportge.1.1.
C2
(su)->clear dhcpsnooping limit ge.1.1
write‐delay (Optional)Specifiesthatthewritedelayvalueshouldbereturnedtothe
defaultvalueof300seconds.
port‐string Specifiestheportorportstowhichthiscommandapplies.