Enterasys SecureStack C2 C2G170-24 - Show Version; Show Version Output Details

show version
SecureStack C2 Configuration Guide 3-25
Example
Thisexampleshowshowtoclearthemessageofthedaybannertoablankstring:
C2(rw)->clear banner motd
show version
Usethiscommandtodisplayhardwareandfirmwareinformation.Referto“Downloadinga
FirmwareImage”onpage3‐30forinstructionsonhowtodownloadafirmwareimage.
Syntax
show version
Parameters
None.
Defaults
None.
Mode
Switchcommand,read‐only.
Example
Thisexampleshowshowtodisplayversioninformation.Pleasenotethatyoumayseedifferent
informationdisplayed,dependingonthetypeofhardware.
C2(su)->show version
Copyright (c) 2007 by Enterasys Networks, Inc.
Model Serial # Versions
-------------- ----------------- -------------------
C2G124-48P 001188021035 Hw:BCM5665 REV 17
Bp:01.00.29
Fw:5.02.xx.xxxx
BuFw:03.01.13
PoE:500_3
Table 3‐5providesanexplanationofthecommandoutput.
Table 3-5 show version Output Details
Output Field What It Displays...
Model Switch’s model number.
Serial # Serial number of the switch.
Versions • Hw: Hardware version number.
• Bp: BootPROM version.
• Fw: Current firmware version number.
• BuFw: Backup firmware version number.
• PoE: Power over Ethernet driver version. (Displays only for PoE switches.)