Enterasys SecureStack C2 C2G170-24 User Manual

set dhcp pool client-name
SecureStack C2 Configuration Guide 16-19
set dhcp pool client-name
UsethiscommandtoassignanametoaDHCPclientwhencreatinganaddresspoolformanual
binding.
Syntax
set dhcp pool poolname client-name name
Parameters
Defaults
None.
Mode
Switchcommand,read‐write.
Example
Thisexampleconfigurestheclientname“appsvr1”tothemanualbindingpool“manual2.”
C2(rw)->set dhcp pool manual2 client-identifier 01:22:33:44:55:66
C2(rw)->set dhcp pool manual2 host 10.12.1.10 255.255.255.0
C2(rw)->set dhcp pool manual2 client-name appsvr1
clear dhcp pool client-name
UsethiscommandtodeleteaDHCPclientnamefromanaddresspoolformanualbinding.
Syntax
clear dhcp pool poolname client-name
Parameters
Defaults
None.
Mode
Switchcommand,read‐write.
Example
Thisexampledeletestheclientnamefromthemanualbindingpool“manual2.”
C2(rw)->clear dhcp pool manual2 client-name
poolname Specifiesthenameoftheaddresspool.Poolnamesmaybeupto31
charactersinlength.
name Specifiesthenametobeassignedtothisclient.Clientnamesmaybeupto
31charactersinlength.
poolname Specifiesthenameoftheaddresspool.Poolnamesmaybeupto31
charactersinlength.

Enterasys SecureStack C2 C2G170-24 Specifications

General

Brand	Enterasys
Model	SecureStack C2 C2G170-24
Category	Switch
Language	English