Enterasys SecureStack C2 C2G170-24

clear eapol
23-20 Authentication and Authorization Configuration
Parameters
Defaults
Ifauth‐modeisnotspecified,allEAPOLsettingswillbecleared.
Ifport‐stringisnotspecified,settingswillbeclearedforallports.
Mode
Switchcommand,read‐write.
Example
ThisexampleshowshowtocleartheEAPOLauthenticationmodeforportge.1.3:
C2(su)->clear eapol auth-mode ge.1.3
auth‐mode (Optional)GloballyclearstheEAPOLauthenticationmode.
port‐string Specifiestheport(s)onwhichtoclearEAPOLparameters.Foradetailed
descriptionofpossibleport‐stringvalues,referto“PortStringSyntaxUsed
intheCLI”onpage 7‐2.