IBM TS3310 User Manual

P
partitioning capability of SAN-ready
Multi-Path Architecture 2-29
parts list 10-1
path failover 2-22
path failover feature license 2-12
periodic key path diagnostics 7-15
Picker 8-59
blown fuse 6-74
LEDs 7-22
manually recover cartridge 6-60
motion failure 6-62
not initializing 6-72
remove/replace 8-72
picker assembly 2-8
point-to-point connection D-54
Post error reporting
disabling D-40
enabling D-40
power
AC failure 6-63
on/off 7-39
requirements C-1
specifications 2-31
power button 2-4
power cords 10-1
power management 2-11
power overload fuse 8-119, 8-121
power plugs 10-1
power supply 2-7
coordinates 2-25
LEDs 7-21
missing 6-68
redundant 2-12
reinstall. 8-54
remove/replace 8-52
removing primary 8-53
removing redundant 8-54
replace 8-54
power switch, safety 5-3
problem reporting 7-2
problem solving 1-1
protective devices
main power switch 5-3
monitored access 5-3
R
rack
remove a 5U library 8-4
remove a control module from a 14U
library 8-5
replace 5U library 8-5
replace control module in 14U
library 8-12
rack installation
safety 5-4
Read/Write capability D-9
rear panel 2-5
drives 2-6
Library Control Blade 2-5
power supply 2-7
redundant power supply 2-12
reinstall 8-36
remote access 7-12
remove 8-1, 8-37, 8-40, 8-119
remove from a rack 8-4
remove, replace 8-59
Remove/replace procedures 8-1
repair preparation 8-4
repairs 8-4
replace 8-1, 8-37, 8-39, 8-42
replace in rack 8-5
reporting 2-14, 2-16
advanced 2-12
drive utilization 2-13
reports
drive utilization 2-12
media integrity 2-12
resetting drives 7-39
restarting the library 7-40
returning library to normal
operations 8-4
RID tag 7-43
robotic system 2-8
RS-422 Wrap Test D-33
RS/6000
error information E-1
S
safety flap 8-37, 8-39, 8-40, 8-42
safety information
electrostatic discharge 7-4, 8-3
laser compliance 5-3
laser safety 5-3
possible hazards 5-2, 7-3
SCSI bus problems
fixing D-51
SCSI Host Interface Wrap Test D-32
SCSI interface
description 2-11
sending your comments iii
Sense data
using B-1
sense data, library B-1
servers supported 2-33
Service
contact information 6-68
Service Action Ticket
T001 6-1
T002 6-2
T003 6-3
T004 6-3
T005 6-4
T006 6-5
T007 6-5
T008 6-6
T009 6-7
T010 6-7
T013 6-9
T017 6-11
T018 6-11
T019 6-12
T020 6-12
T021 6-13
T022 6-14
T023 6-14
T024 6-14
T025 6-15
T026 6-15
T027 6-16
T028 6-16
Service Action Ticket (continued)
T029 6-17
T030 6-17
T031 6-18
T032 6-18
T033 6-19
T034 6-19
T035 6-19
T036 6-20
T037 6-20
T038 6-20
T039 6-21
T040 6-21
T041 6-21
T045 6-22
T046 6-22
T047 6-22
T048 6-23
T049 6-23
T050 6-24
T051 6-24
T052 6-25
T053 6-25
T055 6-26
T060 6-26
T061 6-27
T062 6-27
T063 6-28
T064 6-29
T065 6-29
T066 6-30
T067 6-30
T068 6-31
T069 6-31
T070 6-32
T071 6-32
T072 6-33
T073 6-33
T074 6-33
T075 6-34
T076 6-34
T077 6-35
T079 6-35
T081 6-36
T089 6-42
T090 6-42
T091 6-43
T092 6-43
T093 6-44
T145 6-58
T146 6-58
T149 6-59
Service Action Tickets 6-1
service history 9-1
service menu 7-7
Service menu 7-4
logging in 7-4
service port 7-9, 7-10
service procedures 7-1
shutting down the library 7-39
sled, description of tape drive 2-11
slot coordinates 2-25
software supported 2-33
Specifications
cartridges 2-28, D-13
library 2-31
speed matching 2-11
X-4 TS3310 Tape Library Maintenance Information

IBM TS3310 Specifications

General

Form Factor	Rack-mountable
Tape Technology	LTO Ultrium
Product Type	Tape Library
Interface	Fibre Channel
Expansion	Expandable with additional modules
Supported Tape Technology	LTO Ultrium 5, LTO Ultrium 6
Weight	120 lb (54.4 kg) (fully configured)
Power Supply	Dual redundant power supplies
Operating Temperature	41°F to 95°F (5°C to 35°C)
Non-operating Temperature	-40°F to 140°F (-40°C to 60°C)
Humidity	20% to 80% non-condensing