6: Clarius Model 4200A-SCS Parameter Analyzer
6-200 4200A-901-01 Rev. C / February 2017
Change the graph settings
You can access the settings for the graph by selecting the Graph Settings button. You can also
access these settings by right-clicking the graph.
Dual Graph
Select Dual Graph to display two graphs, one with the Y Axis as the left axis and one with the Y1 Axis
as the left axis.
Auto Scale
Automatically scales all axes one time.
To change how axes are scaled, refer to Define the axis properties (on page 6-200
).
Define the axis properties
To change the properties of the graph axes:
1. Select Analyze.
2. Select Graph Settings.
3. Select Axis Properties. The dialog box shown below opens.
Figure 360: Graph Axis Properties dialog box
The tabs of the Axis Properties dialog box are:
• X Axis: Controls properties of the horizontal axis.
• Y1 Axis: Controls properties of the left vertical axis.
• Y2 Axis: Controls properties of the right vertical axis.
• All Axes: Controls properties that are common to all axes.
To Next Page
Loading...
Need help?
General
