Index-14 Manual # 42-02-7223
J
Jail Master Mode message 6-51
Jail Operation 9-91
Jail operation - Enable automatic mode parameter 9-93
Jail operation - Master mode 9-91
Jail Operation - Secure mode 9-94
Jail Operation inputs 9-137
Jail Operation outputs 9-147
Jail Secure Mode message 6-51
Jerk specification 11-2
Job name parameter 10-7
Job Prints 2-6
Job prints 5-12, 5-48, 6-105, 6-116
K
Keypad controls, iBox 7-4
keypad, call enable device 9-134, 9-135, 10-65
L
Lag delay parameter 9-155
LAN connections 2-30, 8-12–8-15
connecting 8-14
creating 8-12
deleting 8-15
editing 8-15
LAND SYS SENSOR FAULT message 6-51
Landing system
See iLand Landing System
Landing System Sensor Fault message 6-51
Latch First Smoke Detector Zone 9-52
Latch Primary Fire Recall Switch 9-51
Latch Secondary Fire Recall Switch 9-52
Latch the fire hat flashing 9-49
Layouts, iView screen layouts 8-30
LCD display, iBox 7-3, 7-4
LCD Fault message 6-52
LEARN SW TIMED OUT message 6-52
Learn Switch Timed Out Fault message 6-52
Learn switch, iBox control 7-12
Learn U/DNT1-5 and U/DETS Positions message 6-52
Learn U/DNT1-5 and U/DETS Speeds message 6-52
LEARN U/DTS POSITIONS message 6-52
LEARN U/DTS SPEEDS message 6-52
LEARNING EMPTY LOAD message 6-52
Learning empty load values message 6-52
LEARNING FULL LOAD message 6-52
Learning full load values message 6-52
Learning the
Counterweight 3-28
Empty and loaded car weights 4-39
ETS and NTS Limit Switches 4-13
Load weights 4-36, 9-174
Safety Configuration 2-46
Learning the Building floor heights 4-2
Level Down Sensor 3-12, 4-5
Level Up Sensor 4-5
Leveling distance parameter 4-18, 9-156
Leveling Overspeed Test 4-54
Leveling overspeed, Safety parameter 9-176
Leveling sensor indicators 9-9
Leveling speed parameter 4-18, 9-156
Leveling speed, adjusting for final stop 4-31
Light load anti-nuisance 4-36, 9-42
Light Load Anti-nuisance message 6-52
Light Load Input input 9-130
Light Load output 9-141
Light load threshold 4-36, 4-39, 9-150
LIMIT SW CHKSUM FAULT message 6-52
LIMIT SW LEARN FAULT message 6-53
Limit Switches Checksum Fault message 6-52
Limit Switches Learn Fault message 6-53
Load calibration on message 6-53
Load learn process activated message 6-53
Load learn process deactivated message 6-53
Load Weigher
Cross Head Deflection 1-3, 9-150
installing 3-19
Isolated Platform 1-3, 9-150
Rope tension sensing 9-150
Load weigher
Configuring 4-38
Crosshead deflection 4-36
Empty load threshold 4-37
Heavy load threshold 4-36
Isolated platform 4-36
Light load threshold 4-36
Overload threshold 4-36
Rope tension 4-36
Load Weigher (Raw) test point, description 11-4
Load Weigher adjustment for dispatching 4-36
Load Weigher Balanced test point, description 11-5
Load Weigher Feedback test point, description 11-5
Load weigher installation
EMCO Load Weigher 5-52
load weigher learn procedure 9-174
Load Weigher parameters 9-149
Analog Device Configuration 9-150
Heavy load threshold 9-150
Light load threshold 9-150
Load Weighing Device Type 9-149
Over Load Threshold 9-150
Load Weigher Sensor Adjustment 4-21
Load Weigher Signal test point, description 11-4
Loading parameters from a Configuration file 8-22
Lobby Call Dwell Time 9-45
Lobby floor 9-41
Lobby parking delay 10-22
Lobby peak 10-83
Lobby peak detection parameters 10-16
Lobby Peak Mode message 6-53
Lobby peak mode, selecting 10-16
Lobby peak options 10-17
Lobby peak parameters 10-19
Lobby Shuffle delay 10-22
Local / Dispatcher Activated message 6-53
Local / Dispatcher Deactivated message 6-53
Local Area Network 8-12
Local car, description of 10-4
LOCAL DISPATCHER message 6-53
To Next Page