8 64 to 74 Call charge pulses for a call segment:
zzzzzzzzzzz
(z = digit: value range 0 ... 9)
This is always output if call charges accrue for
the call segment (e.g. for transferred calls). If
call charge information is not available, these
11 positions are filled with blanks.
In Austria call charge amounts are output.
11 Right
9 75 to 76 Information element: additional information
value range 0 ... 9
Meaning:
1 = incoming call (voice / 3.1 kHz audio
call)
2 = outgoing call (voice / 3.1 kHz audio
call)
3 = incoming call
(other services)
4 = outgoing call
(other services)
5 = incoming call forwarded
6 = outgoing call forwarded
7 = int/ext/ext conference call with
incoming call / transit by means of
external transfer
8 = conference with outgoing call /
transit by means of external transfer
9 = outgoing call via call forwarding to
external destination
0 = Call information (missed calls
list) is output immediately when a call is
received (output can be suppressed).
This can be used, for
example, for a database search
from a PC. In the case of several
called extensions one line is output
for each individual extension (without
ringing duration, call duration, call
charge information).
+50 = respective offset as code for DISA
calls
2 Right
Hicom 150 E Office Rel.1.0 Service Manual - 7.12 Features for Call Detail Recording
http://cmweb01.mch.pn.siemens.de/e_doku/en/h150/h15/30/sh/2/15_712.htm (17 of 21) [06/04/2000 13:08:18]
To Next Page
Loading...
