8.35 Routes
Introduction
External lines can be combined to form routes in reference to the B channel.
Example
S0 connection for route 1 (S1/Le 401), 1*LS for route 2 (S1/Le 0501) for connecting up a D
box.
The code "0" is used for route 1 and the code "78" is used for route 2.
Programming with Hicom Assistant T
Step Entry Action Display
1. *95 31994 Start system administration System Administration
2. 17-11 Simplified Dialling state: on
3.
* 0
Deactivate Simplified Dialling state: off
4. F7 Return to Simplified Dialling Call Management Out
5. 12 Route assignment S1/Le 0401: 1
6. # 501 Change call allocation for LS trunk S1/Le 0501: 1
7.
* 2
Route assignment for LS trunk to route 2 S1/Le 0501: 2
8. F7 Return to Simplified Dialling Call Management Out
9. 14 Route Type Rte 1: CO
10.
# 2
Select route 2 Rte 2: CO
11.
* 2-1
Set line type to PABX Rte 2: PABX
12. F7 Return to Simplified Dialling Call Management Out
13. 15 Enter Route Name Rte 1: -
14.
* CO
Enter Route Name Rte 1: CO
15.
Confirm Next Rte 2: -
16.
* D-BOX
Enter Route Name Rte 2: D-BOX
17. F8 Return to system administration System Administration
18. 23-4 Enter route code Rte 1, Pos 1: 0
http://cmweb01.mch.pn.siemens.de/e_doku/en/h150/h15/30/sh/2/15_835.htm (1 of 2) [06/04/2000 13:14:34]
To Next Page
Loading...
