3-22
3
Configure Recycler (status menu)
Log In > Status (bottom tool bar) > Note Recycler > Configure Recycler
From this menu, the Note Recycle Cassette denominations can be changed.
The note count in the cassettes can also be altered from this menu.
Configure Recycler (permission)
Log In > Configuration Menu > Edit Groups, Mixes, etc > Permission Groups > (Select Group)
Users linked to a Group with this ability can change the cassette denominations and note counts
from the Status > Note Recycler menu (after log in).
Configuration Menu
Log In > Configuration Menu
X Cold Start System
This function will erase all User files, setup files and transaction file from the Control
Computer setup.
X Edit Groups, Mixes, etc...
Provides access to location setup and User permissions
X Edit Configuration
Provides access to equipment operation setup menus
X Save to USB
Saves the current setup, User information and transaction history to a flashcard
inserted into the USB port under the Display/Touchscreen assembly.
X Force Backup Now
The User will be prompted to select the destination source and files to save.
Current settings will be saved to the specified flash drive.
X Restore From Backup
Files backed up to the Control Computer hard drive or a USB thumbdrive can be
transferred to the Control Computer
Copy Installation Files
Log In > Maintenance Menu
If a flash drive containing TR Series operational setup files is inserted into a USB port, the setup
information can be transferred to the TR Series.
This function will not import User/Permission Group/Department/Register or Mix information (see
IMPORT SPREADSHEET or RESTORE FROM BACKUP).
Copy Trace Files
Log In > Maintenance Menu
Operational transaction log files will be saved to a flash drive.
The User will be prompted to select the desired flashdrive location.
Corporate Store Number
Log In > Configuration Menu > Edit Configuration > Network Reports
Allows programming of a store number (3-12 numbers) for FTP report file transfers.
To Next Page
Loading...