2-28
2
User Log In Options
Users can “Log In” using several methods, depending on settings and equipment configuration.
Log In methods are typically set when users are added, but can be modified using the following
processes.
i-Key Entry
NOTE: The TR250 must be equipped with an “i-Key” reader to utilize this functionality
Log In > User Management > Modify User > User Log In Data
a) Select the User.
b) Select Modify User.
c) Select User Login Setup.
d) Select Logon Data.
e) Select ‘ibutton”.
f) Apply the i-Key to the i-Key Reader socket until data is displayed.
g) Select “Done” in order to save settings.
Fingerprint Reader
NOTE: The TR250 must be equipped with a Fingerprint Reader to utilize this functionality
The User must be present to enroll fingerprints.
Log In > User Management > Modify User > User Log In Data
a) Select the User.
b) Select Modify User.
c) Select User Login Setup.
d) Select Logon Data.
e) Select ‘Fingerprint Reader”.
f) Select “Start”.
X The User will be prompted to apply a finger to the Fingerprint Reader (requires
4 positive reads).
X The User will be prompted to apply a different finger to the Fingerprint Reader
(requires another 4 positive reads).
g) Select “Done” in order to save settings.
To Next Page
Loading...
