Tidel TR303 - Checking the Rolled Coin Dispenser Status; Resetting the Rolled Coin Dispenser Module

13-7
13
Rolled Coin Dispenser Diagnostic Menu
Resetting the Rolled Coin Dispenser Module
1) Navigate to the Diagnostics Menu:
Log In > (enter Executive code) > More > Maintenance > Diagnostics > Rolled Coin
Dispenser
a) Select “Reset”
Checking the Rolled Coin Dispenser Status
1) Navigate to the Diagnostics Menu:
Log In > (enter Executive code) > More > Maintenance > Diagnostics > Rolled Coin
Dispenser
1) Perform a Rolled Coin Dispenser RESET before checking the STATUS
2) Select Status from the Dispenser menu.
a) The display will show the status Rolled Coin Dispenser.
b) Refer to the “Troubleshooting” section of this chapter for information concerning and
errors listed in the Status menu