Tidel TR303 - Coin Handler Serial Number; Network Configuration;Test; Store Name;Number

2
2-11
Note Handler Serial Number
The Note Handler Serial Number should be set from the factory, however, verification is
recommended.
Log In > Done > (1-2-3-4-5-6) > Configuration > Edit Configuration > Note Recycler Serial #
The Serial Number of the Note Handler can be found on the Manufacturers decal on the
inside/left wall of the Electronics Bay
Coin Handler Serial Number
The Coin Handler Serial Number IS NOT SET FROM THE FACTORY and must be entered at the time
of installation.
Log In > Done > (1-2-3-4-5-6) > Configuration > Edit Configuration > Coin Recycler Serial #
The Serial Number of the Note Handler can be found on the Manufacturers decal on the
inside/rear wall of the Coin Sorter compartment
Store Name/Number
Log In > Done > (1-2-3-4-5-6) > Configuration > Edit Configuration > Coin Recycler Serial #
A unique name/number must be entered to identify the specific location where the
Recycler is installed.
Network Configuration/Test
The Network ID information must be entered in order to access Recycler Reports, push updates, etc...
The Network ID information must be obtained from the Recycler Host.
Log In > Done > (1-2-3-4-5-6) > Configuration > Edit Configuration > Network Configuration
The appropriate fields should be populated with the Host provided information.
NOTE: a “ping” can be performed to verify newtwork functionality.
1) Ensure all network cables/connections are connected to a working source.
2) Select “ping” (Google.com).
3) Verify a positive confirmed ping.
Mandatory Programming