3-54
3
Hopper Statistics
Log In > Maintenance Menu
Each Hopper is subjected to a request/acknowledgement routine.
The accumulated percentage of successful acknowledgements is displayed
This menu must be exited and re-selected each time an updated status is desired.
iButton Diagnostics
Log In > Maintenance Menu
An i-Key can be placed in the Reader socket.
If i-button encoding is displayed, the iButton Reader and i-Key are functioning
i-Key Reader (enable)
Log In > Configuration Menu > Edit Configuration
Must be enabled when TR Series Recycler is equipped with an i-Key Reader.
If disabled, no prompts for i-Key entry or log in will appear the menus.
Import Spreadsheet
Log In > Configuration Menu > Edit Groups, Mixes, etc > Import Spreadsheet
Users can be loaded from a thumbrive to the TR Series using a properly completed CSV
spreadsheet.
The User Spreadsheet template can be obtained from Tidel.
The User spreadsheet must be named “users.csv” in order to transfer files.
In/Out Net On Deposit Receipt is by Till (T/F)
Log In > Configuration Menu > Edit Configuration > Report/Receipt Menu
The net difference between the start of shift and the end of shift will be summarized when the End
Of Shift is performed
Include In/Out Net On Deposit Receipt (T/F)
Log In > Configuration Menu > Edit Configuration > Report/Receipt Menu
When an END OF SHIFT is performed a net total of the starting balance (start of shift) and the
amount deposited (end of shift) will be summarized at the bottom of the End Of Shift report
Incremental Backups
Log In > Configuration Menu > Edit Configuration > EOD And Accounting Options Menu
ENABLED:
System backup will occur when the TR250 series is idle (not being used)
DISABLED:
System backup will occur 1 time a day (typically 3:00 am)
To Next Page
Loading...