Tidel TR303 - Printer; Note Recycler; Network Connection

1-20
1
Network Connection
Step 1: Ensure the network cable extiting the TR Series product is connected to the desired hub/
switch/router socket.
Step 2: Navigate to the Network Configuration Menu:
Log In > Done > (1-2-3-4-5-6) > Maintenance Menu > Network
Step 3: Select PING Google.
A confirmed ping response indicates a working network connection.
Note Recycler
Step 1: Ensure the Note Recycler Door is shut & locked.
Step 2: Perform a shut down.
Log In > Exit > Shut Down Computer
Step 3: Place the Note Handler ON/OFF switch in the OFF position
X Wait 30 seconds.
Step 4: Place the Note Handler ON/OFF switch in the ON position
X The Main Screen appears, the Note Recycler should run
Step 5: Select the STATUS bar at the bottom of the Main Screen.
Step 6: Select Note Recycler
The indicators at the top of the status screen should display working conditions.
Printer
Step 1: Ensure paper is loaded in the Printer.
Step 2: Navigate to the Printer Maintenance Menu:
Log In > Done > (1-2-3-4-5-6) > Maintenance Menu > Printer Reset
Step 3: Select “Test Printer” - the Printer should print a “test page”.
Functional verification