EasyManua.ls Logo

Tidel TR303 - Coin Sorter Cleaning Interval; Coin Hopper Maintenance Interval; Coin Hopper Cleaning Interval; Maintenance;Odometer Configuration

Tidel TR303
484 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
3-58
3
Maintenance/Odometer Configuration
Log In > Configuration Menu > Edit Configuration > Maintenance/Odometer Configuration
Warnings can be generated when specified dispensed/sorted Coin and Note amounts are set.
X Coin Hopper Cleaning Interval
The CLEANING reminder is pre-set from the factory to appear after 70,000 (default),
coins have been dispensed from any of the Coin Hoppers.
The reminder interval can be changed to appear between 1 and 999,999 coins.
When displayed, the Coin Hopper Base should be disassembled for cleaning.
X Coin Hopper Maintenance Interval
The MAINTENANCE reminder is pre-set from the factory to appear after 500,000
(default), coins have been dispensed from any of the Coin Hoppers.
The reminder interval can be changed to appear between 1 and 999,999 coins.
When the MAINTENANCE reminder is displayed, the Coin Hopper Base should be
disassembled and inspected for signs of wear on the feed/exit pathways and metal
parts at the exit.
Hoppers should be replaced if excessive wear is visible.
X Coin Sorter Cleaning Interval
The CLEANING reminder is pre-set from the factory to appear after 70,000 (default),
coins have been sorted.
The reminder interval can be changed to appear between 1 and 999,999 coins.
Log In > Configuration Menu > Edit Configuration > Maintenance and Odometers
When the reminder is displayed, cleaning procedures should be performed.
X Coin Sorter Maintenance Interval
The MAINTENANCE reminder is pre-set from the factory to appear after 500,000
(default), coins have been sorted.
The reminder interval can be changed to appear between 1 and 999,999 coins.
Log In > Configuration Menu > Edit Configuration > Maintenance and Odometers
When the MAINTENANCE reminder is displayed, the Coin Sorter should be inspected
for signs of wear on the feed/exit pathways and metal parts.
The Coin Sorter should be replaced if excessive wear is visible.
X Note Recycler Cleaning Interval
The CLEANING reminder is pre-set from the factory to appear after a (combined) total
of 200,000 (default), notes have been dispensed and accepted.
When the reminder is displayed, cleaning procedures should be performed on the Note
Recycler by a certified technician.
X Note Recycler Maintenance Interval
The Maintenance reminder is pre-set from the factory to appear after a (combined)
total of 500,000 (default), notes have been dispensed and accepted.
When the reminder is displayed, inspection of the Note Recycler components should
be performed to determine wear.

Table of Contents

Related product manuals