3-50
3
EOD And Accounting Options Menu (continued)
Log In > Configuration Menu > Edit Configuration > EOD And Accounting Options Menu
X Use Named Accounting Periods (T/F)
When disabled, report file selection will be displayed by date range (typically preceding
“End Accounting Period” to Successive “End Accounting Period).
If enabled, the User will be prompted to enter a name for the accounting period when
the “End Accounting Period” is performed.
X Warn Registers Still Out
When an Automatic End Accounting Period is enabled or an End Of Accounting
Period is performed, a warning will be displayed if registers are still checked out.
Can be set between 1 - 23 hours.
Exchange
Log In > Configuration Menu > Edit Groups, Mixes, etc > Permission Groups > (Select Group)
Users in a Group with this permission can adjust the coin count of the Hoppers and note count of
the Note Cassettes.
NOTE: the User’s Group Permissions must also have the ability to “Service Recyclers” to use this
function.
Exit
Log In > Exit
The following options are available from this menu.
X Log Off
Will exit the Tidel Application
X Reboot Computer
Will perform a warm start on the computer (all components of the computer will be
reset)
X Restart Software
The Tidel Application will be restarted (all other components of the computer will not be
reset).
X Shutdown Computer
The computer will be turned off - should be performed prior to disconnecting VAC
power from the TR Series.
To Next Page
Loading...
