5-2
5
Operating System (OS) - Windows 8
Computer shut down (application exit)
In the event of operational errors, a system reset may be required to rectify the error.
It is STRONGLY recommended that a “Shut Down Computer” is performed prior to disconnecting VAC
power from the Note Handler.
Failure to perform a “Shut Down Computer” prior to disconnecting power from the TR250 can result in
corruption of Customer database files !
WARNING: Disconnecting VAC power from the TR250 without performing a “Shut Down
Computer” may require the use of a USB keyboard in order to recover.
Log In > Exit > Shut Down Computer
A power reset can be performed by placing the ON/OFF switch in the OFF position for a minimum of 30
seconds.
Computer service
The Computer is replaced as a complete assembly.
Disassembly of the Computer should not be required.
The Computer does not contain wireless network capability, however, a wireless device can be
equipped to the TR250 (externally), if required.
Computer
Control Computer (cover removed)
To Next Page
Loading...