3-86
3
Status
Main Screen selection (no Log In)
Selecting “STATUS” while the Main Screen is displayed (no User logged in), will present a current
conditions screen.
No corrective action can be performed from this screen.
Selecting Note Recycler or Coin Recycler (center of the screen), will display appropriate status
menus.
Status screens will display:
Error conditions
Cassette contents
Hopper contents
Door position/Lock status
Status
Log In > Status (bottom tool bar)
Selecting “STATUS” (bottom of screen), after Log In will allow access to menus which can
perform corrective functions.
Typically used for Coin and Note Recycler functions or problem resolution.
Corrective functions available to users will be based on the User’s Permission Group Settings
Coin Recycler Status Menus:
Audit = Empty and re-load Recycle Cassettes
Clear Error = Accesses problem resolution selections
Configure Recycler = Hopper coin denomination can be changed
Dispense To Overflow = Specified amounts of coins are dispensed to the overflow bin
Dump/Accept = All coins are dumped from a Hopper, then sorted back into the hopper
Empty Bin = Removed the amount reported in the overflow bin
Perform Maintenance = Accesses the maintenance “odometer” counts
Transfer from Overflow = Specified amounts are removed from the overflow bin
Note Recycler Status Menus:
Audit = Empty and re-load Recycle Cassettes.
Clear Jam/Error = Accesses problem resolution selections
Note Exchange = Recycle Cassette note counts can be adjusted
Empty Reject = Removes the reported amounts from the Reject Cassette
Extract Deposit = Removes the reported amounts in the Deposit Cassette
Perform Maintenance = Accesses the maintenance “odometer” counts
Prepare Deposit = Moves notes from the Recycle Cassettes to the Deposit Cassette
To Next Page
Loading...
