Tidel TR303 - Coin Handler Top Cover; Coin Sorter; Fingerprint Reader; NFC Reader (Register Tray Tag Reader)

1-19
1
Functional verification
Coin Handler Top Cover
Step 1: Open the Coin Handler Top Cover.
The displayed Sensor map should indicate the sensor is are OPEN.
Step 2: Close the top cover on the Coin Handler
The displayed Sensor map should indicate the Top Cover Sensor is CLOSED.
Coin Sorter
Step 1: Navigate to the Sorter Maintenance Menu:
Log In > Done > (1-2-3-4-5-6) > Maintenance Menu > Sorter Reset
Step 2: Select Reset.
The display should indicate an “OK” status.
Fingerprint Reader
Step 1: Navigate to the Fingerprinter Reader Test Menu:
Log In > Done > (1-2-3-4-5-6) > Maintenance Menu > Fingerprint Reader
Step 2: When prompted, place a finger onto the Fingerprint Reader lens.
An image of the fingerprint should be displayed
i-Key Reader
Step 1: Navigate to the “i-button” Reader Test Menu:
Log In > Done > (1-2-3-4-5-6) > Maintenance Menu > i-button Diagnostic
Step 2: When prompted, apply an i-Key (maintenance key preferably), to the socket.
The code/data of the i-key should be displayed
NFC Reader (Register Tray Tag Reader)
Step 1: Navigate to the NFC Reader Test Menu:
Log In > Done > (1-2-3-4-5-6) > Maintenance Menu > NFC Reader Diagnostic
Step 2: When prompted, place a Data Code Tag in front of the NFC Reader.
The code/data of the tag should be displayed