2-34
2
Open Doors
Allows the User to open doors specified in the Group or Individual Permissions.
Open Drop Chute
Allows the User to open a locked Drop Deposit Chute.
The User must also have the permission “Open Doors” enabled in order to open specific doors.
(Only on units equipped with Storage/Drop vaults).
Open Drop Vault
Allows the User to open the Drop vault.
The User must also have the permission “Open Doors” enabled in order to open specific doors.
(Only on units equipped with Storage/Drop vaults).
Open Rolled Coin Dispenser
Allows the User to open the front vault door on the Rolled Coin Dispenser (if equipped).
The User must also have the permission “Open Doors” enabled in order to open specific doors.
Open Storage Vault
Allows the User to open the Storage vault.
The User must also have the permission “Open Doors” enabled in order to open specific doors.
(Only on units equipped with Storage/Drop vaults).
Override check in
Allows the user to perform a “Force Check In” (Check in a register for a User that is not present
or has not brought a register till in).
Pickup Cash
A User can make deposits from a Register that is still checked out.
This function is usually performed prior to the CASH OUT or END OF DAY functions or when till
amounts need to be reduced.
Prepare Deposit
Preparing a deposit will cause the Note Recycler to move notes from the Recycle Cassettes to
the Deposit Cassette in order to achieve the Static Balance amount in the Note Handler
Pull reports
This function will allow User to access the report printing functions and menu of the Note
Handler
Requires Dual Log In
Assigning this function to a User will require an additional code entry (by another User), for “dual
access” operation.
The “Can Act As Dual Log In” must be assigned to a User in order for the feature to be used.
See Counts
This ability will allow the User to see Note counts when the “Status” bar is selected at the bottom
of the Main Screen.
Permission Denitions
To Next Page
Loading...