3-55
3
Increment Displayed Weekdays
Log In > Configuration Menu > Edit Configuration > EOD And Accounting Options Menu
This feature only functions when “Use Named Accounting Periods” is disabled.
ENABLED:
When an End Accounting Period is perform, the new (beginning) accounting period will be
named/displayed as the day/date following the current day/date
DISABLED:
When an End Accounting Period is perform, the new (beginning) accounting period will be
named/displayed as the current day/date.
Install Backup Stick
When a blank flash drive is installed, performing this function will create a directory to save backup
data (REVBACKUP).
If this function is subdued, a flash drive with the REVBACKUP directory already exists on the
Computer.
Inventory Level Warnings
Log In > Configuration Menu > Edit Configuration > Inventory Level Warnings
Warnings can be generated when Coin and Note amounts reach a specific count.
Setting high level warnings higher than factory default settings IS NOT RECOMMENDED !!!
Select the denomination in the high or low level column and enter the coin/note count number
required to generate a warning.
Achieving a low/high count threshold will generate a warning on the main screen - operation of the
TR Series will not be halted
Exceeding the high count threshold WILL NOT stop operation.
Coin Hoppers
0 - 9999
Overflow Bin
0 - 9999
Exception (reject) Bin
0 - 9999
Stop Level
0 - 9999
Notes (Recycle)
0 - 4000
Notes (Reject)
0 - 150
To Next Page
Loading...