Tidel TR303 - Clearing Cleaning Odometers

14
14-53
Clearing Cleaning Odometers
Coin Hoppers
1) Navigate to the Coin Recycler Menu.
Log In > Status (bottom tool bar) > Coin Recycler > Perform Maintenance
2) Select the desired Hopper and choose “CLEAN”.
3) Verify cleaning was performed - when prompted to reset the counter to “0”.
4) Repeat steps 2 & 3 to clear counters on cleaned Hoppers.
Coin Sorter
1) Navigate to the Coin Recycler Menu.
Log In > Status (bottom tool bar) > Coin Recycler > Perform Maintenance
2) Select the count for the Acceptor.
3) Verify cleaning was perform when prompted to reset the counter to “0”.
Note Recycler
1) Navigate to the Note Recycler Menu.
Log In > Status (bottom tool bar) > Note Recycler > Perform Maintenance
2) Select the count for the Acceptor.
3) Verify cleaning was perform when prompted to reset the counter to “0”.